The flagship AURORA AMP.6-350 redefines reference car audio—replacing separate processors, multi-channel amplifiers, monoblocks, and complex RCA wiring with a single, breathtaking masterpiece. At its core beats the legendary Analog Devices™ ADAU1701 56-Bit SigmaDSP®, coupled with triple 32-Bit / 384kHz DACs and a 1050W PurePath™ HD power stage.
Engineered with a 100% Pure Digital Front-End, music streams directly via 24-Bit Lossless USB or Hi-Res Direct-to-Core Digital Bluetooth with zero analog conversion and absolute immunity to engine whine (112dB SNR). With our proprietary SmartBridge™ technology, a single tap in the Android app reconfigures the amplifier from 6 Discrete Channels (6 × 175W RMS) into a 4-Channel Cabin Stage + 350W RMS (2Ω) Subwoofer Monoblock, while 2 dedicated 2.0V RMS RCA Pre-Outs (Ch 7 & 8) allow limitless system expansion.
assets/img/amp_hero.jpgTraditional amplifiers waste nearly half of your battery power as heat, dimming headlights and straining vehicle electrical systems. Our dual-phase synchronous boost and PurePath™ HD stages achieve over 94% efficiency—converting battery current directly into cool, effortless acoustic power.
No soldering and no internal jumpers required. Configure Channels 5 & 6 directly from the Android app to operate either as a 2x 175W stereo pair or as a bridged 350W RMS (2Ω) monoblock subwoofer driver.
By enclosing the output filter within a precision feedback loop, PFFB reduces distortion below 0.005% THD+N, guarantees load-independent tweeter clarity, and delivers vise-grip subwoofer cone damping.
Command every acoustic parameter live from the driver’s seat: 13-Band Parametric EQ with Q-Factor control, Holographic Time Alignment (0.1ms steps), Dual Bass Synthesis (Dynamic & SuperBass), Active Crossovers, and Phase Polarity.
Uniting 56-bit studio acoustic mastery with ultra-efficient, zero-loss synchronous power:
High-power car amplifiers are notorious for overheating and taxing modern vehicle electrical systems. AURORA AMP.6-350 solves this through two breakthrough power technologies:
Using ultra-low-loss synchronous rectification interleaved at 180°, the internal power plant elevates fluctuating 9V–16V battery voltage into a rock-solid 36.0V DC rail with minimal heat—ensuring zero power sag even on the heaviest sub-bass drops.
Staggering the switching phase across all three internal amplifier stages smooths current draw, eliminates switching losses, and delivers 1050W of dynamic power on stock vehicle electrical systems.
AURORA AMP.6-350 features the complete, uncompromising software suite of our reference standalone processor. Powered by Analog Devices™ ADAU1701 and hardware Safeload registers, every tweak on your phone applies in real time while music plays: 13-Band Parametric EQ with Q-Factor, Dual Bass Engines (Dynamic Bass & SuperBass), Stage HPF Protection, 3-Mode Active Crossovers, 6-Ch Fader Mixer, Phase Polarity, and Holographic Time Alignment (0.1ms / 3.4cm steps)!
Adapt effortlessly to any installation requirement now or in the future:
Enable Subwoofer PBTL Mode in the app to bridge Channels 5 & 6 into a 350W RMS (2Ω) monoblock while Channels 1–4 power your front and rear stage.
Run a full 6-channel active 3-way front stage while routing fully processed, time-aligned subwoofer signals through Channels 7 & 8 (2.0V RMS gold-plated RCA Pre-Outs) to an external monoblock.
Ultra-HD amplification for front & rear component speakers.
App-switched parallel bridge for deep, effortless subwoofer slam.
Dedicated 2.0V RMS RCA outputs for external amplifier expansion.
By eliminating analog input cables and transmitting audio 100% digitally via 24-Bit Lossless USB and Hi-Res Direct-I2S Bluetooth, alternator whine and ground loops are eradicated at the root. Our Non-Stop Master Clock Guardian eliminates digital jitter across all sources, feeding triple 32-Bit / 384kHz DACs and PFFB power stages for a breathtaking 112dB SNR.
Full real-time control over all 8 acoustic modules and SmartBridge™ power routing (scroll horizontally):
24-Bit Lossless USB & Hi-Res Direct-I2S BT
ZERO WHINE1050W Speaker Terminals + 2V Pre-Out
PURE SIGNALWith an ultra-wide frequency bandwidth, near-zero phase shift via Post-Filter Feedback (PFFB), and a shielded brushed-aluminum chassis, AURORA AMP.6-350 achieves >112dB signal-to-noise ratio and <0.005% THD+N—revealing the subtlest vocal breaths and instrumental textures with lifelike holographic depth.
In conventional digital amplifiers, clock timing mismatches between Bluetooth, USB, and DSP cores cause acoustic jitter and veil musical detail. Our continuous Master Clock Management locks every digital stream with picosecond precision.
Brushed aluminum chassis featuring a continuous internal heatsink tunnel, isolated silent fan, and native OEM CAN-Bus steering wheel & display integration.
assets/img/amp_pcb_top.jpgEngineered on a 4-layer PCB with a solid ground plane, shielded high-current inductors, and a continuous thermal tunnel for relentless performance.
assets/img/amp_enclosure.jpgCompact 220×185.5×60.5mm footprint featuring heavy-duty power and speaker terminals, gold-plated RCA pre-outs, and a long-range wireless RF window.
First-edition production is limited. Register below to secure priority delivery and special pre-order pricing for customers and authorized installers: